Enter the NTC thermistor resistance values at your hot, ambient and cold temperatures:
Thermistor Resistance Hot Ω
Thermistor Resistance Ambient Ω
Thermistor Resistance Cold Ω

Enter the divider input voltage and the desired output voltages at hot, ambient and cold.
The load resistance at Vout is assumed to be much greater than the resistor values.
Source Voltage
Output Voltage Hot
Output Voltage Ambient
Output Voltage Cold

CANNOT ACHIEVE THESE VOLTAGES WITH THIS THERMISTOR



Ra = 0 Ω
Rs = 0 Ω
Rp = 0 Ω


9309